Landelela i-Drive Motor JMV053
◎ Isingeniso esifushane
Uchungechunge lwe-JMV lweTrack Drive Motor luhlanganisa i-JMV Axial Piston Motor ehlanganiswe nebhokisi leplanethi elinamandla amakhulu.Isetshenziswa kabanzi kuma-Mini Excavators, ama-Drilling Rigs, amathuluzi ezimayini kanye nezinye izisetshenziswa ze-Crawler.
| Imodeli | I-Max Output Torque (Nm) | I-Max Working Pressure (Mpa) | Isivinini Sokukhipha Esiphezulu (r/min) | Ithoni Esebenzayo(T) |
| JMV053 | 11700 | 27 | 51 | 7-9T |
◎ Isibonisi Sevidiyo:
◎ Izici
• U-gearbox ohlanganisiwe one-2-speed Axial Piston Motor
• Ingcindezi elinganiselwe efika kumabha angama-365
• Ukususwa: 16cc ~ 274cc
• Ifanele i-1.5 ton ~ 50 ton izicelo zeselula
• Ama-valve Adidiyelwe Wokusiza kanye Nama-Counterbalance
• Ibhuleki Lokupaka Lemishini ehlanganisiwe ephephile
• Ukusebenza okuphezulu kwemishini kanye nevolumu kusiza ukunciphisa ukulahleka kwamandla
• Idizayini ethuthukisiwe yetorque yokuqala ephezulu nokusebenza kahle kukonke
• Idizayini esezingeni eliphezulu iqinisekisa ukuqala/ukusheshisa okushelelayo futhi kwehlise izinga/ukuma
• Idizayini eqinile enamandla amakhulu
• Ukushintsha okuzenzakalelayo ukusuka ku-torque ephansi enesivinini esikhulu ukuya kwi-torque enesivinini esiphansi lapho kumelana nokuhamba okuphezulu
• Ukusebenza okuphezulu nokuthembeka, ukwamukelwa kwemakethe ephezulu ngamayunithi angaphezu kwesigamu sesigidi ensimini
• Ukulingana okuhambisanayo kwezidingo zokufaka ezidume kakhulu emakethe
◎ Imininingwane
| Imodeli | JMV053 |
| Ukususwa Kwezimoto | 53/34 cc/r |
| Ingcindezi yokusebenza | 27.5 Mpa |
| Ingcindezi yokulawula isivinini | 2 ~ 7Mpa |
| Izinketho zesilinganiso | 45.6 |
| Ubukhulu.i-torque ye-Gearbox | 11500 Nm |
| Ubukhulu.isivinini se-Gearbox | 51 rpm |
| Uhlelo lokusebenza lomshini | 7-9 amathani |
◎ Ukuxhumana
| Ububanzi boxhumano lozimele | 210 mm |
| Ibhawodi ye-flange yohlaka | 12-M16 |
| Uhlaka lwe-PCD ye-flange | 250 mm |
| Ububanzi boxhumano lwe-Sprocket | 265 mm |
| Ibhawodi ye-flange ye-Sprocket | 12-M14 |
| Sprocket flange PCD | 300 mm |
| Ibanga le-Flange | 80 mm |
| Isisindo esilinganiselwe | 90 kg |
◎Isifinyezo:
Izinhlelo zokusebenza ezijwayelekile:
• I-Excavator kanye ne-excavator encane
• I-crawler crane
• Iwintshi
• Inkundla yokusebenza yasemoyeni
• I-Grasper
• Ukubhola okujikelezayo
• Ukubhola okuqondile okuqondile
• I-crusher
• Ukugaya i-asphalt
• Imoto ekhasayo ekhethekile
