Technical Support
-
INSTRUCTION MANUAL for WTM Travel Motor (part 2)
Instruction Manual for a WEITAI made WTM Travel Motor (part 2) IV. Installation Lifting: the Travel Motor shall be lifted according to the requirements indicated on the package. After unpacking, the lifting of the Travel Motor shall be carried out with the corresponding ropes. Check the Travel M...Read more -
INSTRUCTION MANUAL for WTM Travel Motor (part 1)
Instruction Manual for a WEITAI made WTM Travel Motor (part 1) I. Overview WTM series Hydraulic Travel Motor (Final Drive, Track Motor) is a travelling device for Crawler Equipment. It is a swash plate hydraulic motor and planetary gearbox reducer assembly. It consists of a valve block wi...Read more -
Travel Motor maintenance: Gear Oil Change
Travel Motor maintenance: Gear Oil Change When you received a brand new Travel Motor, change the gearbox oil within 300 working hours or 3-6 months. During the following using, change the gearbox oil no more than 1000 working hours. If you are going to drain the oil, it is better to do s...Read more -
Final Drive maintenance: Gear Oil checking
Important Note: If you are receiving a Weitai Travel Motor which is delivered by air or Express Courier, there won’t be any oil inside the gearbox. You have to add new gear oil into the gearbox before starting using the new Travel Motor. For ocean or land delivery, there will be enough oil inside...Read more -
Why Travel Motor Is A Best Choice For Crawler Excavator?
The weight of medium and large crawler excavators is generally above 20t. The inertia of the machine is very large, which will bring a big impact to the hydraulic system during the start and stop of the machine. Therefore, the travel motors control system must be improved to adapt to this kind of...Read more -
Advantages And Disadvantages Of Final Drive Hydraulic Transmission
Part 1 : Hydraulic Transmission’s basic features and Disadvantages: The hydraulic transmission requires the following conditions: (1) Drive with a liquid with a certain pressure (2) Two energy conversions must be performed during the transmission (3) The drive must be carried out in a sealed cont...Read more
