Ụgbọ ala ikpeazụ WTM-18
◎ Okwu mmeghe
WTM-18 Final Drive bụ nke nwere nnukwu arụmọrụ okpukpu abụọ Swash-plate Piston Motor jikọtara ya na igbe igbe mbara ala dị elu.
A na-eji ya eme ihe maka ndị na-egwu egwu ịnya ụgbọ ala, Drilling Rigs, Ngwuputa Ngwuputa na ngwa crawler ndị ọzọ.
Nlereanya | Oke nrụgide arụ ọrụ | Oke.Mmepụta Torque | Oke.Ọsọ mmepụta | Ọsọ | Ọdụ ụgbọ mmiri | Ngwa |
WTM-18 | 30 MPa | 17000 Nm | 57 rpm | 2-ọsọ | 4 ọdụ ụgbọ mmiri | 10-13 Tọn |
◎Akụkụ ndị bụ isi:
Swash-plate Axial Piston Motor nwere arụmọrụ dị elu.
Moto ọsọ okpukpu abụọ nwere oke oke maka ojiji ọtụtụ ebe.
breeki na-adọba ụgbọala maka nchekwa.
Oke kọmpat na ịdị arọ dị mfe.
Ịtụkwasị obi àgwà na elu anwụ ngwa ngwa.
Jiri mkpọtụ dị obere mee njem were were.
Nhọrọ ngwaọrụ wheel efu.
Ọrụ mgbanwe ọsọ akpaaka bụ nhọrọ.
◎ Nkọwapụta
Ntugharị moto | 43/67 cc/r |
Nrụgide arụ ọrụ | 30 Mpa |
Nrụgide njikwa ọsọ ọsọ | 2 ~ 7 Mpa |
Nhọrọ oke | 53 |
Oke.torque nke Gearbox | 17000 Nm |
Oke.ọsọ nke Gearbox | 57 rpm |
Ngwa igwe | 10-13 Tọn |
◎ Njikọ
Dayameta njikọ etiti | 246 mm |
Mkpuchi flange | 20-M16 |
PCD flange | 280mm |
Dayameta njikọ Sprocket | 324 mm |
Sprocket flange bolt | 15-M16 |
Sprocket flange PCD | 364 mm |
Ogologo flange | 100mm |
Ihe dị ka ibu | 150kg |
◎Nchịkọta:
WTM-18 Travel Motors dabara maka ọtụtụ ndị na-egwupụta hydraulic na ahịa.Dị ka Airman, Atlas Copco, Bobcat, Case, Caterpillar, Daewoo/Doosan, Gehl, Hitachi, Hyundai, IHI, JCB, John Deere, Kobelco, Komatsu, Kubota, Liebherr, LiuGong, Lonking, Lovol, Mitsubishi, Nachi, New Holland , Nissan, Pel Job, Rexroth, Samsung, Sany, Sandvik, Schaeff, SDLG, Sumitomo, Sunward, Takeuchi, Terex, Wacker Neuson, Wirtgen, Volvo, XCMG, XGMA, Yanmar, Yuchai, Zoomlion na d ndị ọzọ isi ika Excavators.